Product ID:EPK 1C RESIN
MSDS Date:03/08/1993
FSC:1430
NIIN:00-109-6969
Kit Part:Y
MSDS Number: BQWKB

DEXTER CORP HYSOL DIV

1 DEXTER DR.
SEABROOK, NH 03874
US

Emergency Phone: 603-474-5541 800-424-9300(CHEMTREC)

Info Phone: 603-474-5541

Cage: 1JB33

DEXTER CORP THE HYSOL DIV

SEABROOK, NH 03874 US

Telephone: 603-474-5545

Cage: 1JB33

TALC (CONTAINING ASBESTOS ?)

CAS: 14807-96-6

RTECS: MW2700000

Fraction By Weight: 30-60%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBERS/CC; 9293

DGBA EPOXY RESINS

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 30-60%

LD50 LC50 Mixture:TLV=2MG/M3 RESPIRABLE DUST
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIEL CONTAINS TALC EMULSIFIED
IN A RESIN.THERE IS NO HAZARD OF LUNG DAMAGE,UNLESS DUST IS
FORMED.EYES/SKIN:MODERATELY IRRITATING;CAN CAUSE BURNS IF MATERIEL
IS HOT.MAY BE A SKIN SENSITIZER.IN GEST:LOW TOXICITY.
Explanation of Carcinogenicity:NO DATA.
Effects of Overexposure:SKIN:RASH,HIVES,IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN OR EYE DISORDERS,
AND SKIN OR LUNG ALERGIES.

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING.IF SKIN IS UNBROKEN,WASH
WITH SOAP AND WATER.EYES:FLUSH WITH WATER.IF IRRITATION
PERSISTS,CALL DOCTOR.DO NOT ATTEMPT TO PEEL OFF MELTED
MATERIEL;COOL IT WITH WATER;CO VER WITH CLEAN GAUZE.INHAL:REMOVE TO
FRESH AIR.GIVE OXYGEN IF NEEDED.INGEST:DO NOT INDUCE VOMITING!NO
TREATMENT IS NEEDED UNLESS LARGE QUANTITIES ARE INGESTED ...SEEK
MEDICAL ADVICE.

Flash Point Method:PMCC
Flash Point:480F,249C
Extinguishing Media:WATER FOG,FOAM,DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:MATERIEL WILL NOT BURN UNLESS PREHEATED.COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.DO NOT ENTER CONFINED
SPACE WITH SCBA AND FULL BUNKER GEAR.
Unusual Fire/Explosion Hazard:MANUFACTURER STATES NONE.

Spill Release Procedures:COLLECT MATERIEL AND PLACE IN AN APPROPRIATE
CONTAINER FOR DISPOSAL IN ACCORDANCE WITH FEDERAL,STATE AND LOCAL
ENVIRONMENTAL CONTROL REGULATIONS.
Neutralizing Agent:NONE

Handling and Storage Precautions:STORE IN A COOL,DRY, WELL VENTILATED
PLACE.KEEP AWAY FROM HEAT AND FLAMES.READ AND FOLLOW LABEL
INSTRUCTIONS.
Other Precautions:AVOID EYE AND SKIN CONTACT.

Respiratory Protection:IF NEEDED FOR VAPORS FROM HEATED MATERIEL,USE A
NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST IS PREFERRED;MECHANICAL EXHAUST IS
ACCEPTABLE.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:CHEMICAL GOGGLES;SPLASH SHIELD
Other Protective Equipment:SAFETY SHOWER AND EYE WASH.
Work Hygienic Practices:WASH HANDS.SEPERATE WORK CLOTHES FROM STREET
CLOTHES.LAUNDER WORK CLOTHES BEFORE REUSE.KEEP FOOD OUT OF THE WORK
AREA.
Supplemental Safety and Health
NONE

HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NIL
Spec Gravity:1.57
Solubility in Water:INSOLUBLE
Appearance and Odor:LIQUID,HIGH VISCOCITY;WHITE;VERY SLIGHT ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG LEWIS OR MINERAL ACIDS;IN REACTIONS WITH CURING AGENTS
SIGNIFICANT HEAT IS RELEASED.
Stability Condition to Avoid:HIGH HEAT SOURCES OF IGNITION.
Hazardous Decomposition Products:ALDEHYDE AND ACIDS ARE FORMED IN
COMBUSTION.REACTION WITH CURING AGENTS MAY RELEASE HEAT.
Conditions to Avoid Polymerization:STRONG
ACIDS,AMINES,MERCAPTANS,BASES.

Waste Disposal Methods:FOLLOW FEDERAL,STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.